| After-sales Service: | Online |
|---|---|
| Warranty: | 1 Years |
| Max.Head: | >150m |
| Max.Capacity: | >400 L/min |
| Driving Type: | Motor |
| Material: | Stainless Steel |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier This series of pumps are single-suction, multistage, sectional centrifugal pumps. The maximum temperature of the conveyed liquid is 130ºC.
The flow range is 3.5-130m/h, and the head range is 60-1100m. It is mainly used for boiler feedwater in medium and small thermal power plants, and can also be used for water supply occasions with small flow and high head. It has the characteristics of good structural rigidity, smooth operation, and long service life.
The pump's shaft seal uses soft packing seal, which can also be changed to mechanical seal.
The main manufacturing materials of the parts are:
inlet section, middle section, outlet section, guide vanes, and other flow-through parts - ordinary cast iron, ductile iron, or stainless steel.
impeller - ductile iron or stainless steel.
frictional wear of the balance device - overlaying wear-resistant materials.
shaft - carbon steel or stainless steel.
The meaning of the numbers in the model: such as DC50-80. 50 - design point flow rate (m3/h), 80 - single-stage head (mm).
The inlet and outlet diameters of the pump are shown in the table below:
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}